Phone
transmitters FAQ
what is the difference between item 100 - miniature phone
transmitter and the rest of your phone transmitters ?
the only difference between item 100
- miniature phone transmitter and the rest of the phone transmitters is the
way it is installed.
To install item 100 you have to open the phone socket
on the wall ,to identify the two wires of the phone line and keeping polarity
in mind connecting the miniature phone transmitter to those specified two
wires.
What's the advantage of using the concealed
phone transmitters ( items 105, 106, 107, 110 ) over item 100 ?
if you have a separate phone socket in your home / office
which is hidden or un accessed ( connected to the line you want to record
the conversation from ) you'll prefer to use item
105 - Phone socket conceals transmitter or any other concealed phone transmitter
.
item 105 is extremely simple to install , just plug it in
to the wall like any other phone device and you done.
You can also use an extension cord to hide the concealed phone transmitter
in a less accessed area of the room.
In case you think all your phone sockets are easy to access
and any additional phone device will be obvious , then you will prefer to
use item 100 - Miniature phone
transmitter .
can
i use the phone transmitter on the same phone line with a modem ?
the phone transmitter is using the phone
line current as power source.
That is one of the reasons the phone transmitter can be so small ( eliminating
the need for AC power source or a battery ) .
therefore the phone transmitter is using some
of the current intended for other devices connected to your phone. Different
phone companies are using different currents to "push" the phone devices connected
to there system.
The current they are using also varies depending on the distance of the phone
company from your house / office.
From our experience in some areas the transmitter works along
with the use of any modem.
In other areas it won't , there is no specific modem to use which will fix
that problem if it occurs.
Other phone transmitters in the market which are not using
the current from the phone line as a power source , are using a battery or
AC adapter which is connected to the transmitter .
this arrangement makes the device ( transmitter and power source ) so big
which makes it impossible to install inside a phone socket , or hide it in
relatively small space.
With these kind of transmitters you'll have to replace the battery every day
or so.
Radio
scanner - receiving and recording the transmitted signal FAQ
what is the best way to receive the
transmission signal of the room or phone transmitters ?
the best receiver will be item
189 - radio / scanner .
the radio scanner is more sensitive and precise for picking up the transmitted
signal from a greater range then items 180 or 185, the radio scanner is also
more cost efficient then the other two.
What is the use of items 180 and 185 ?
Items 180 and 185 are still manufactured
and available on our site to support our customers who are using our previous
versions of transmitters.
How can i record / listen the conversation
when i am using the radio scanner ?
to record the room or phone conversation you need to use VOX
operated tape recorder , also sold through our site.
The tape recorder is connected to the radio scanner with a special cord (
supplied with the radio scanner ) .
using the radio scanner - item 189 , and the VOX
operated tape recorder , you will be able to automatically listen / record
the phone calls immediately when a call is made ( one of the phone devices
connected to the same line is in use ).
can i use batteries to operate the radio
scanner ?
the radio scanner powered on four AA
size batteries , or by using AC adapter ( supplied with the scanner ) .
the receiver ( item 189 ) will pick up
and if connected to a tape recorder also will record the sound from the room
/ office at all times.
The receiver will pick up and if connected to a VOX operated tape recorder
also will record the sound from the phone calls ONLY when a call is in progress.
Can i record / listen to the phone and room
transmitter at the same time ?
please notice that you can listen to
the room conversation and the phone calls using item 189 - radio scanner ,
BUT NOT AT THE SAME TIME , that's because the transmitted frequencies of the
room and phone transmitters are close by , but not precisely the same.
If you need to pick up both the room and phone conversation at all times,
you have to use two receivers ( item 189 ).
Room
transmitters FAQ
how to install item 142 ( DC adapter conceals
transmitter ) ?
item 142 is
a DC adapter which conceals room transmitter .
it will transmit the conversation with in the room / office immediately when
it is connected to AC outlet .
what is the difference between AC and DC
adapter ?
there is some confusion with the terminology
of AC and DC adapters , with in the technical literature .
item 142 is connected to AC power outlet in the wall ( input ), and produces
12 volt DC power on its cord (output ). therefore enabling you to use the
adapter with any 12 volts DC powered equipment ( up to 600 milliamperes of
current ) .
please notice that the concealed transmitter will operate as long as the AC
adapter is connected to the power outlet , whether you are using the output
DC power or not .
Phone
debugging FAQ
what kind of phone transmitters the tap
/ VOX debugger and the secure phone will eliminate ?
the Tap / Vox debugger eliminates the use of any VOX bugging
devices from the phone line .
among other bugging devices it will also debugs most of the phone transmitters
in the market today.
Phone transmitters ( crystal based or not, parallel or serial
) are using the phone line current as power source.
the Tap / Vox debugger has special circuit to detect minute changes in the
phone line voltage or current, therefore it defeats any phone transmitter
which operates on line current .
the debugger also defeats most of the transmitters which are based on battery
or AC adapter for their power source ( crystal based or not, parallel or serial
).
in fact there are a small group of transmitters that might be undetected by
the debugger , these transmitters (usually used by government agencies ) are
seldom found or used in the civil market since they are very expensive or
the technology of these transmitters did not " leaked " has of now .
what kind of tapping devices the tap / VOX
debugger and the secure phone will eliminate ?
the tap / vox debugger defeats bugging devices which are
connected anywhere along the phone line , including bugging devices inside
the phone sockets or bugs hidden inside any phone device ( including fax and
answering machine ) .
can i use the tap / VOX debugger or the
secure phone on a phone line with caller i.d ?
the tap / vox debugger will not let the caller i.d. To work
properly , since the caller i.d. Sends a flow of data on the phone line all
the time , this data is treated like a bugging device .